Roof Cleaning And Moss Removal: The Required Steps

Moss use to grow in surroundings which are wet at least fraction of the time. Grooves and cracks between shingles where water used to linger make an ideal growing environment for this obstinate and drifting plant. Getting rid of the moss itself is a moderately simple mechanical procedure. Preventing its re-growth, that must be measured as part of the cleaning procedure, is best proficient with a bleach rinse just the moment all the visible moss has been eliminated.

Guidelines for Roof Cleaning And Moss Removal

1. Duct strip a standard bristle scrub brush to the end of the long pole. Use a ladder for getting one self up on to the roof. Whichever; take the long pole with the bristle brush built up on it up the ladder with one or have some one hand it up.

2. Position the bristles of the brush against the uppermost shingles on the roof which shows the signs of moss growth. Make use of the pole for guiding the brush downhill, applying mild pressure in opposition to the roof. This must be sufficient to scrape the moss off ever since they have no genuine root system.

3. Wet all the plants growing near the edging of the roof down comprehensively. This helps in defending them from the bleach one is about to apply. If one could cover them with plastic sheeting, as well, all the more better.

4. Make a solution of 1 part bleach and 1 part water in the spray bottle addition for a garden hosepipe. Don’t make use of a pressure washer; this may injure the shingles on the roof. Direct the spray from the garden hose down the roof from the top of the roof. Ensure that it flows over all the areas which had growth of moss. The spray’s function is to kill any residual moss growth which isn’t visible to the bare eye.

5. Clean all the plants below the area of spray methodically with bleach-free and clean water from the hose. It helps in ensuring that they absorb as little bleach as probable from the cleaning procedure.